It's just a small mod but now pedals feel much better under foot when I brake with force. But I like that new look with black screws too. I don't use any shoes, just socks, so I got some sore spots on my foot after longer period of racing because of that holes.
I don't want to ... By: cortkatanakx1q. on 12 Sep 11, 18:27:26 I don't want to invest in some special shoes right now. I have much better feel with socks and I really need to feel that pedal vibration. It's a good feature, but sometimes even with socks I barely feel? it. That's why I use socks. I feel very comfortable with this modification.
If you feel good ... By: giupy86. on 12 Sep 11, 00:23:51 If you feel good with that solution is ok, but I recommend to use a pair of shoes instead of socks... With heavy pedals? like those the sock' s era is finished. You will not be sore with shoes and you' ll feel much much better... Ps: I was a socker player too, but with the CSP or modern load cell pedals you absolutely need shoes, with low profile possibly
This is how it works. I used that locking (rotating) button only the first time. Now I use just that clamping mechanism. I don't have a problem with it, even though some people claim they have. It holds perfecty on my table without any unwanted movement.
thx, damn i would? ... By: Bruni101. on 01 Sep 11, 09:01:07 thx, damn i would? need at least 5cm right under my desktop is a collarbeam.
Hi. I measured 4 cm ... By: cortkatanakx1q. on 30 Aug 11, 11:36:01 Hi. I measured 4 cm + a few mm could be possible, but I don't think that it would grip? well. If you have less than 4 cm then it should be "OK". It grips well on my table and it doesn't rotate as some people say. Problem is that the steering wheel moves when you push it down. The mechanism isn't too strong. But you can always buy that original table clamp for 39,95?. I don't need it for now.
My table? is fairly ... By: Bruni101. on 30 Aug 11, 05:29:42 My table? is fairly thick, whats the max distance the clamp can fit?
As title says this is just a show off of these pedals. They hold well on laminate flooring. Although quite big pressing force is required for brake pedal, this set has good grip. By the way, their weight is 5,2kg!
Note: It all depends on how flat and slippy your floor is. I've tried it on different place and it slips a bit. My pedals lean against wall and I put there a piece of foam.
Caps - elna silmic ... By: cortkatanakx1q. on 13 Mar 12, 23:23:19 Caps - elna silmic 2, low esr nichicons and solen fastcap. Different psu with mosfet and non-inductive heatsink mounted resistors. It sounds brighter and? more detailed. I'd like to make another amp, probably mosfet too with different construction just for comparing and fun.
what better parts? ... By: santiks. on 13 Mar 12, 16:40:19 what better parts? care? do describe more in it?
My new toy finished. :) It was a bit tricky to solder, because it is so small and I've got just soldering gun. It sounds better than soundcard and works with games too, so I will use it all the time. I can even enable 3d sound in games.
This kit is great ... By: cortkatanakx1q. on 29 Apr 11, 11:26:51 This kit is great starter for that money and no capacitors in signal path. Love it. And I don't need expensive soundcard for? better sound. I've only got soldering gun, but I was able to solder it somehow.
Soldering this kit ... By: beftus1264. on 29 Apr 11, 07:36:09 Soldering this kit tricky but well worth the effort. This? is a great sounding USB DAC.
I have them from my ... By: cortkatanakx1q. on 28 Feb 12, 16:41:03 I have them from my distributor. But you can find some replacement earpads on w w w . t h o m a n n . d e.?
Very simple guitar buffer. Current consumption about 1,6mA. Fets have quite wide parameters so if you get a bit distorted signal try another BF245B or use a trimer in R2 and R3 position.
The fet mini mixer ... By: cortkatanakx1q. on 06 Mar 11, 18:42:21 The fet mini mixer doesn't amplify and? has gain slightly less than 1. When I simplify it - when you have fet output from source (pin S), it doesn't amplify. If it has output from pin D - drain, it amplifies and also invert signal.
I'm not very ... By: san5a89. on 06 Mar 11, 16:10:36 I'm not very skilled but in this case I mean the audio meaning for passive. In other words for an active mixer I? mean an auto-amplified one, for passive mixers I mean just a mixer without an amp. So audio mixers are always equiped with 12 volt plugs...Do you think with this FET Mini Mixer I can obtain an equal one??
No, you need a? ... By: cortkatanakx1q. on 06 Mar 11, 15:33:24 No, you need a? battery. But behringer mx400 uses 12v adaptor, so it's not a pasive circuit.
and the "fet mini ... By: san5a89. on 06 Mar 11, 08:57:13 and the "fet mini mixer" is a passive one? like the behringer mx400??
If you want a mini ... By: cortkatanakx1q. on 05 Mar 11, 21:44:09 If you want a mini mixer, there are simple fet schematics. Check in google pictures with :? "fet mini mixer".
It's also called ... By: cortkatanakx1q. on 05 Mar 11, 21:40:50 It's also called fet booster. Here is nice video: youtube.com/watch?v=h0xas_0f5d8
You can replace R4 with potentiometer as output? volume.
It's an amplifier. ... By: cortkatanakx1q. on 05 Mar 11, 21:36:03 It's an amplifier. I put it here because I wanted to make some soundcard based oscilloscope tutorial and it works as buffer there. But I use it also with electric guitar in? front of digital multiefect or other efects. You can use it with your soundcard with amplitube, guitarrig... I had similar circuit built in my guitar.
what's a "FET? ... By: san5a89. on 05 Mar 11, 10:27:33 what's a "FET? buffer"?? If I put other input jacks can I use it as a mini mixer?
It works in quite ... By: cortkatanakx1q. on 01 Nov 11, 13:57:17 It works in quite lots of games, including NFS Shift. If game supports TrackIR, it should work. I use it in Race07 series and have tried it in iRacing. It's great for simracing? if you don't own tripple screen. There also exist Face track NoIR.
did free track can ... By: Awesometanmingwei. on 01 Nov 11, 05:32:05 did free track can play any game? like n f s shift 2
Have you tried ... By: cortkatanakx1q. on 21 Sep 11, 18:10:53 Have you tried options in "orientation" tab? I haven't experienced that kind of problem.?
my skull is always ... By: SoloNetherlands. on 21 Sep 11, 14:01:15 my skull is always upside-down, also if I start it up :(!?
This is a good tip for more silent disk. However, you shouldn't forget to mount some cooler on it. Unless your HDD is Green Power.
Update: When hot, temperature raises to 31°C, but not more. That's great because my previous disk had around 43°C.
i don't have a lot ... By: 000Nagby000. on 06 Aug 11, 20:10:26 i don't have a lot of money and my deskstar? is from 2009 (7200rpm)
and if i buy a SSD it will be a 50Go vertex 2 i guess
There are some " ... By: cortkatanakx1q. on 06 Aug 11, 19:55:49 There are some "silent boxes" for HDD, but I wouldn't use them because of temperature. The only solution is probably a new HDD. But I don't know how noisy are the new fast disks, so I think SSD? + slower and silent HDD is the best option. If you optimised your OS and don't allow it to grow too much, 128GB SSD for about 200? should be OK. Too bad that SSD are still pricey.
well did you? have ... By: 000Nagby000. on 06 Aug 11, 18:04:06 well did you? have a tip like putting the himuro in a box because it is out from the case
it is a? hitachi ... By: 000Nagby000. on 06 Aug 11, 18:02:26 it is a? hitachi desktar which is already a lot quieter than WD caviar blue
Your HDD is ... By: cortkatanakx1q. on 06 Aug 11, 17:54:05 Your HDD is probably too much noisy. Some very fast model? I had some terrible HDD before and it really get on my nerves. So I bought green line HDD. It's not fast, but works for me. When you bolt it to the pc case it's noisy, but not this way. I'm planning one SSD disk for system and a? few racing games and another silent green line disk for other data for my next pc.
i use the himuro? ... By: 000Nagby000. on 06 Aug 11, 15:00:02 i use the himuro? with a quiet HDD out of the case 2 meter away behind the PC
and the noise still annoy me :/
ive used best ... By: stigyo92. on 27 Jun 11, 12:21:37 ive used best method? for hdd noise/vibration reduction an elastic cord and put it under my dvd burner it now hangs in the air you cant even notice my pc has an HDD until u look "under the hood"....
I was worried about it's size, but it fits into mATX fine. It's quite heavy so I had to fix it. :) Fan didn't like that previous weird position and there were sometimes strange noises. Now it's perfectly silent.
Oh... i am going? ... By: stronger61. on 26 Dec 10, 10:06:41 Oh... i am going? to buy a Msi 5770 hawk and i have a large soundcard . but thanks :) subbed
I fixed my card ... By: cortkatanakx1q. on 21 Oct 10, 12:37:13 I fixed my card with a cord and after then no more strange noises. Don't know if? that fixed it but it's OK now.
my fan make a weird ... By: tallandme13. on 21 Oct 10, 00:45:44 my fan make a weird noise as well, what did you do to fix? it?
i bought? matx ... By: miksulder. on 26 Aug 10, 08:56:23 i bought? matx board to my atx case
There isn't so much noise actually. It's only amplified by camera. In reality you barely hear something. But around 1600rpm it's quite loud. I put that thermistor on integrated VGA for more rpm.
@xXScarecrow187Xx ... By: nevermind89pwnz. on 30 Nov 11, 17:33:21 @xXScarecrow187Xx grill just makes more noise, i removed all my grills and you'll be ok as long as you dont stick? you fingers in...
But what about a ... By: TheGBdude. on 09 Jul 11, 20:39:01 But what about a hamster ? ?
@xXScarecrow187Xx ... By: cortkatanakx1q. on 03 May 11, 19:37:34 @xXScarecrow187Xx But? I don't have cat or anything so I don't care. ;)
@xXScarecrow187Xx ... By: cortkatanakx1q. on 03 May 11, 18:11:11 @xXScarecrow187Xx Why should I? I? don't like grills.
Thanks for the ... By: browntroutdown. on 04 Jan 11, 16:58:16 Thanks for the advice. In case anyone else wants to install this fan the thermostat control seems to work without the yellow wire connected to anything. On the PS3 i sandwiched the temp sensor underneath and just to the side of the spring plates pressing the heatsinks to? the chips. The fan was wired to the base of the 2 solid pins that plug into the bottom of the power supply unit, 12v to the front pin, ground to the back.
No. You can? put ... By: cortkatanakx1q. on 26 Dec 10, 00:47:02 No. You can? put there one pci card. So just sound card because of graphics card you won't be able to use that second pci slot. You can see it on my radeon 4770 video. I haven't use overclock yet.
yeah i want to like ... By: stronger61. on 25 Dec 10, 23:06:56 yeah i want to like upgrade my pc i have an old MSI MS-7507 :D it sux . but is it good for overclock? U mean there is no room for the audio card then when i put? a 2 slot grapic card?
If you want micro ... By: cortkatanakx1q. on 25 Dec 10, 14:31:03 If you want micro atx, socket 775 and ddr2. It's not the most powerful, but I play games on it. Onboard soundcard is bad as every onboard audio. You can only use one pci slot when you? put a graphics card in which sucks if you put there soundcard too.
Is that motherboard ... By: stronger61. on 24 Dec 10, 20:38:13 Is that motherboard good? i am going to buy it if? its good
Red is +12V and ... By: cortkatanakx1q. on 16 Dec 10, 11:15:52 Red is +12V and Black is GND. Try it with 9V battery for example. You can google for "3pin fan pc connector" in google images? and you should find that connector wiring. You should place that thermistor close to components wich produce heat in your PS3.
My motherboard ... By: cortkatanakx1q. on 16 Dec 10, 11:06:59 My motherboard manual says that 3pin system connector has +12v, gnd and 3th pin with "no use". Strange is, that I still get RPMs. Maybe different revision or type. That can be your problem. Check your? manual.
I have a 3 pin ... By: browntroutdown. on 16 Dec 10, 00:07:14 I have a 3 pin connector F12 TC that i'd like to run in a PS3 to cool it down. ANy idea if the thermostat part run with only a 12v and earth feed without the rpm sensor wire plugged in as i'll be cutting the cables and soldering them in. Im hoping the thermostat bit is simply a variable resistor in the 12v - earth circuit, leaving the rpm sensor redundant. Any idea which colour cable is? which?
Out,? off course. By: cortkatanakx1q. on 11 Dec 10, 10:41:27 Out,? off course.
The airflow goes in ... By: Fabioslay87. on 09 Dec 10, 18:35:02 The airflow goes in the case or? out? Tnx
Try download "CPUID ... By: cortkatanakx1q. on 03 Nov 10, 12:32:57 Try download "CPUID HWMonitor" or another monitoring program. I think that the program on my video is sisoft sandra. But? I'm not sure. Check rpm's also in BIOS. You should put that thermistor close to hot components for more rpm's. I have mine between radeon 4770 and cpu. It start spins faster in more demanding games.
I plugged mine into ... By: dencolitis. on 03 Nov 10, 02:30:08 I plugged mine into a 3 pin connector and it doesnt show rpm, while from those 4? pin ones i get rpm's. And please tell me how to change rpm's ...I googled it a bit and couldnt find any...and I think mine is spinning little to slow I would like to speed it up.
No.? Only when you ... By: cortkatanakx1q. on 01 Nov 10, 20:14:14 No.? Only when you want to change rpm's you need 4 pin connector. 3 pin is for monitoring.
How can you measure ... By: dencolitis. on 01 Nov 10, 12:31:37 How can you measure the rpm's because I have the same one and it came with the 3 pin connector and to measure rps it? must have 4 pin connector?
I put that? ... By: cortkatanakx1q. on 16 Sep 10, 10:36:17 I put that? thermistor on nortbridge/integrated vga heatsink which has around 40-50°C so it spins faster.
how did you? get ... By: KingOfSand100. on 16 Sep 10, 04:32:48 how did you? get your f12 to spin faster than 1300RPM, mine should go up to 2000 but wont.
I have lot of older ... By: cortkatanakx1q. on 17 Aug 10, 18:57:43 I have lot of older games to play and for me is power consumption quite important too. So for now I am satisfied with this? pc. It was cheap and that is even more important. :)
It's 45nm. It isn't ... By: cortkatanakx1q. on 17 Aug 10, 18:51:24 It's 45nm. It isn't very powerful cpu,? but no problem with older games. I ran Mafia 2 demo benchmark on max setting and no problem.
sweet! is your ... By: omaifakingad. on 17 Aug 10, 17:03:53 sweet! is your e6600 45nm or 65nm ? I have about 20 hours until my order arrives. I'll report back,? cheers!
I have pentium ... By: cortkatanakx1q. on 17 Aug 10, 16:10:50 I have pentium e6600 3ghz dual core. My temperatures are 55 degrees at maximum for both cores and katana runs at 750rpm all the time! I set? it up in bios that way. Idle temps are 38/34 for both cores. I applied thermal paste pretty bad for the first time and I got temperatures about 12 degrees higher. Case sensor shows 45 degrees max and vga 54 degrees. I have also 12cm fan in psu. AC F12 runs at 1350rpm when I play a game for long time. Idle 815rpm.
so was mine. I've ... By: omaifakingad. on 17 Aug 10, 10:49:09 so was mine. I've bought a q8200 + scythe katana 3, silent as hell. The problem is my 4850 which gets kind of noisy. And dissipates a LOT of heat, compared to my old 8600gt anyway. I've ordered a accelero? s1 + Arctic Cooling F12 (that's how I got to your video) which I'll put to exhaust from my case or on the accelero, haven't decided.
What cpu do you have and what temps is it running at? my q8200 is veeery hot, I don't think the seller cleaned it. I'll do that & add thermal.
Processor is Intel Pentium E6600 dual core.
There isn't so much noise actually. It's only amplified by camera. In reality you barely hear something. But 2500rpm are quite loud and very disturbing. Funny thing is that fan isn't necessary for my CPU. That heatsink itself can keep CPU cool. :)
yea, but my case is ... By: OpiumWarz. on 06 May 12, 15:58:36 yea, but my case is 200 mm wide. 1.5 cm for the cable managment. so that leaves me with 185 mm but i also have a side 190mm fan which is 20mm thick, which leaves me with 165mm of room plus stand-offs for my mobo which is probably 10mm, so 15.5 inch exactley. but i was considering a cooler something like 12cm-14.5cm. And? the scythe katana was roughly 140mm and the zalman 130mm. whould you reccomend a cooler that is max 14.5cm and cools very well?
Thanks
I don't know. My ... By: cortkatanakx1q. on 06 May 12, 13:36:12 I don't know. My CPU isn't hot so it has ridiculously low RPM and you don't hear anything. My whole PC is silent. If it was some quad core, I bet it wouldn't. That Zalman looks good but I would choose something more? bigger if you don't want to have louder PC. When I tested it on full RPM, oh man, that was loud as hell. I will definitely buy good coolers and more than necessary the next time too. It's well spend money for that silence.
this or? the Zalman ... By: OpiumWarz. on 06 May 12, 10:52:50 this or? the Zalman CNPS 7X LED?
No. I have? radeon ... By: cortkatanakx1q. on 21 Feb 11, 20:21:47 No. I have? radeon 4770. It's in response video.
lol you have? a big ... By: 22rapmaster. on 21 Feb 11, 19:23:48 lol you have? a big cooler
but a onboard graphiccard?
Lol Can you send me ... By: Hikary17Sama. on 01 May 12, 14:13:43 Lol Can you send me your widgets please?
?
sabes? trukos del ... By: shishicisne. on 20 Sep 11, 02:33:37 sabes? trukos del sansung gt S5233t oh algien q sepa publiquen pues
I have sent you ... By: cortkatanakx1q. on 29 Jun 11, 14:13:21 I have sent you personal message. Shortcuts are not possible on s5230.?
Oh great man!! ... By: DaLonGMaN89. on 29 Jun 11, 13:51:48 Oh great man!! awesome... hey can I? have this widget of yours? and btw do u know how to create a shortcut widget to applications such as for bolt browser?
will give? it a go ... By: Yahya76. on 28 Apr 11, 21:05:17 will give? it a go - thanks :)
Just use "settings ... By: cortkatanakx1q. on 28 Apr 11, 19:30:45 Just use "settings - display and light - widget" and you can remove? anything you want from widget bar.
Is there any way at ... By: Yahya76. on 28 Apr 11, 17:12:09 Is there any way at all that i can delete widgets from the sidebar thing ? It's so frustrating !? Also, my GT-S5230 acceses YouTube but only plays sound - anyone have a solution to that ? (other than strapping fireworks to the thing and enjoying the kablammo lol)
I've just sent you ... By: cortkatanakx1q. on 10 Mar 11, 21:06:33 I've just sent you a personal? message with download link for this widget.
where can? i ... By: jeroenbruekers. on 10 Mar 11, 19:55:51 where can? i download widgets??? can you give me those widgets?
how to make my own widgets?
where can i ... By: jeroenbruekers. on 10 Mar 11, 19:54:32 where can i download widgets??? can you give me? those widgets?
I uploaded it to ... By: cortkatanakx1q. on 07 Feb 11, 20:12:29 I uploaded it to megaupload. Check? you personal messages.
I uploaded it to ... By: cortkatanakx1q. on 07 Feb 11, 20:12:22 I uploaded it to megaupload. Check? you personal messages.
can you please tell ... By: Gherman1997. on 07 Feb 11, 19:59:35 can you please tell me how to get? it plz
Click on my ... By: cortkatanakx1q. on 03 Feb 11, 11:44:42 Click on my profile? name and there is a send message option. Write me your email and I will send you that widget. Instalation is very easy.
this is the? widget ... By: iklojk. on 03 Feb 11, 02:55:19 this is the? widget im looking for
please tell me how to get it
ty
i'm testing my own ... By: xXh4L1mXx. on 06 Nov 10, 16:56:12 i'm testing my own widgets using the "samsung mobile innovator", it has a great tool? where you can test the widgets you wrote on your pc before putting them on your phone
There is also ... By: cortkatanakx1q. on 05 Nov 10, 22:31:15 There is also fantastic program "opera widget emulator".? It's very useful when you make your own widgets or testing downloaded widgets. But you need also install opera browser.
thank you very much ... By: xXh4L1mXx. on 05 Nov 10, 19:23:06 thank you very much,? it's interesting to see how such technical stuff works :)
They have also some ... By: cortkatanakx1q. on 05 Nov 10, 17:16:51 They have also some source codes on the? samsung mobile innnovator forum.
When you know html ... By: cortkatanakx1q. on 05 Nov 10, 17:15:37 When you know html and javascript then you won't have any problem. Look at "samsung mobile innovator" site for tutorials. And you can find plenty of information on? the internet.
very interesting? ... By: xXh4L1mXx. on 05 Nov 10, 15:56:14 very interesting? video.
can you tell me where to learn or read something about xml in context with widgets (for samsung), i learned html and javascript at school, but nothing (not much) about xml
thanks could you ... By: TheNewy1234. on 25 Oct 10, 14:13:07 thanks could you make a video how to make this i found some sites , but I just don't? know how to use it.
dev.w3.org/2006/waf/widgets/
I use offline ... By: cortkatanakx1q. on 25 Oct 10, 10:55:49 I use offline instalation via internet browser. If you have example.wgt, make a text file example.txt and rename it to example.html. Then click on example.htm? in your mobile and it will open in browser. Then just edit link in adress bar to your .wgt file and instalation will begin.
what is the weg ... By: TheNewy1234. on 24 Oct 10, 19:08:03 what is the weg file and how to install the widget via tk file? explorer??? or something else???
It's XML (HTML) and ... By: cortkatanakx1q. on 04 Jun 10, 11:30:20 It's XML (HTML) and JavaScript.? It isn't very difficult actually. When you know what to do though. This code is quite simple. It's more like doing a web page.
Well, that sucks ... By: cortkatanakx1q. on 10 Mar 12, 22:12:08 Well, that sucks then. I have two readers and both work fine. I have one inserted in my? router as a memory card which is always on. Works fine.
It's not that, I'm ... By: Anima10pontonet. on 10 Mar 12, 20:23:49 It's not that, I'm inserting it properly all right. But whenever I connect the reader with a card inserted into it to a PC, it will either respond with a "Device not recognized" typical error? message, or detect the device properly, then suddenly disconnect at random intervals, and start a cycle of quickly and autonomously connecting and disconnecting by itself until it can no longer be recognized by Windows. I had to buy a separate 3.5" reader so that my 32GB SDHC is of any use.
Really? You can ... By: cortkatanakx1q. on 10 Mar 12, 19:39:04 Really? You can insert it into USB port upside down very easily, so you have to? be careful if you are inserting it the right way. :)
I bought one of ... By: Anima10pontonet. on 10 Mar 12, 04:19:46 I bought one of those but it? doesn't really wok |:
tambien se puede ... By: MICHELLE11444. on 08 Oct 11, 00:17:28 tambien se puede meter a la compu?
and? wala, an ... By: cactussheep. on 07 Jul 11, 14:44:49 and? wala, an interchangeable usb pen drives are borned
Which OS? do you ... By: cortkatanakx1q. on 06 Jul 11, 16:17:52 Which OS? do you have?
I have one of these ... By: m19921992. on 06 Jul 11, 05:27:27 I have one of these but my computer keeps telling me its? an unknown device... help
thans? alot mate u ... By: fanaticbeatz. on 21 Feb 11, 21:56:46 thans? alot mate u saved my ass xD
Thank you so much ... By: desires4u2. on 19 Nov 10, 09:53:44 Thank you so much for posting? this video. I had no idea how to insert by card into the Kingston reader. You're a life saver.
put it in? the usb ... By: sangwria. on 25 Sep 10, 07:45:14 put it in? the usb slot!
Really? I had ... By: cortkatanakx1q. on 08 Sep 10, 09:13:53 Really? I had different problem. I plugged it upside down into USB port the first time and it didn't work. And next time when I wanted to boot my PC with linux on it. I? thought my motherboard does't support booting from USB. :)
Thanks for this! ... By: flamencopeg. on 08 Sep 10, 02:52:11 Thanks for this! For the life of me, I couldn't figure out how the stupid reader? thingy worked!!
u need a sd card ... By: markiss303. on 03 Mar 10, 16:06:58 u need a sd card reader aprox $30 ? comes with 4 slots diff ones for apps pc store
most printers have them in front fit ya mini? sd card in sd card adapter and wack it in the slot and away u go i may have to do this as i cant work out my blue tooth for ipone yet cheeeeeeeeeers lol
this was good i ... By: markiss303. on 03 Mar 10, 16:00:59 this was good i finally seen wich sd card i? need for me iphone 8 pins lol thkz
the rest didnt turn over to show wanka,s ha
cheers dude
USB port. It's ... By: cortkatanakx1q. on 16 Dec 09, 14:57:06 USB port. It's without that metal shielding cover so it's a bit? thinner.
where do you plug ... By: MyLifeGoes0n. on 15 Dec 09, 06:03:44 where do you plug it in. I? cant seem to find a place in the comp.
It was a big surprise for me when I found this small diaphragm inside. It's the same varimotion XXL diaphragm as in K14x (mkII, HD), K17x (mkII, HD), K24x (mkII, HD), K27x (mkII, HD). Around 26mm and they call it XXL. Joke, right?
lol you're saying ... By: GenoSkill. on 30 Jan 11, 02:52:42 lol you're saying the same again?
I'm not saying that ... By: cortkatanakx1q. on 01 Jul 10, 13:19:29 I'm not saying that they are the best. But you must be joking. Every headphones with magic word "DJ" I have ever heard? sounded like a garbage. And yeah, what isn't overpriced? Your TDK are overpriced too. AKG K702, Grado, Sennheiser, ... too. They sound bad for example with discman, but sound fine with my mosfet amp with PC. My next headphones will be around 400?.
AKG K530 is a ... By: HiFiexpert. on 30 Jun 10, 21:56:49 AKG K530 is a typical example of heavily overpriced stylish Asian rubbish built by underpaid workers. Looks very nice but? sounds like garbage. Try to remove the plastic blob in front of the speaker by force to get less distorted sound. Remove the plastic membran ring and put it back with a little glue to get some ventilation, shunt them with 60-80 Ohm, but they still sounds like a toy. My cheap TDK MP100 sounds miles better, and so do probably most cheap headphones back in the days of Beatles.
I'm not sure how it ... By: cortkatanakx1q. on 21 Oct 11, 19:26:08 I'm not sure how it works for your model, but check ebay.co.uk and search for "akg k420 pads". There is currently only one item with good picture how those earpads look from the other side. Looks like you have to just? pull it off. There are cheap, so don't worry.
Does this work for ... By: CharvelCX292N. on 21 Oct 11, 18:29:54 Does this work for AKG K420? (and if it doesn't,? do you know how to change the pads with that model?)
Thanks (:
thanks? By: vejita92. on 07 Jul 11, 14:34:08 thanks?
No, I think not. ... By: cortkatanakx1q. on 28 Feb 11, 20:04:53 No, I think not. This locking mechanism is different from K701. So I think K601 are different too. I'm affraid that you'll need? to do heavy googling.
Does the earpads ... By: maciejeichler. on 28 Feb 11, 12:18:12 Does the earpads from? K601 suit to the AKG K530? Maybe someone knows where i can find these earpads for K530 LTD?
It depents if you ... By: cortkatanakx1q. on 30 Jan 11, 15:39:50 It depents if you want solid state, hybrid or? DIY.
how much an amp? ... By: GenoSkill. on 30 Jan 11, 02:51:09 how much an amp? for k530 cost??
cheers
@Freelancing100 ... By: cortkatanakx1q. on 20 Jan 11, 10:59:52 @Freelancing100 These headphones don't have much bass. I guess it would be similar to K701 which some people hate. I like balanced sound. But they can make some deep bass with a type music like raggea. However, they sound bad with my discman and not so good directly from soundcard. An amplifier is necessary for full? size headphones.
@Freelancing100 I ... By: cortkatanakx1q. on 20 Jan 11, 10:54:04 @Freelancing100 I don't? wash them much. But when I do, just a bit of soap water is fine. Yes, you can search for brands like sennheiser, beyerdynamics or grado. I haven't heard any sennheiser, beyerdynamics or grado but they are very popular. K530 are quite good headphones, but they can cost too much. I payed 125? with is way too of for this headphones. My K701 for 199? are on the way to me. Very good price from thomann.de.
I'm not saying that ... By: cortkatanakx1q. on 01 Jul 10, 13:19:54 I'm not saying that they are the best. But you must be joking. Every headphones with magic word "DJ" I have ever heard sounded like a garbage. And yeah, what? isn't overpriced? Your TDK are overpriced too. AKG K702, Grado, Sennheiser, ... too. They sound bad for example with discman, but sound fine with my mosfet amp with PC. My next headphones will be around 400?.
AKG K530 is a ... By: HiFiexpert. on 30 Jun 10, 21:58:18 AKG K530 is a typical example of heavily overpriced stylish Asian? rubbish built by underpaid workers. Looks very nice but sounds like garbage. Try to remove the plastic blob in front of the speaker by force to get less distorted sound. Remove the plastic membran ring and put it back with a little glue to get some ventilation, shunt them with 60-80 Ohm, but they still sounds like a toy. My cheap TDK MP100 sounds miles better, and so do probably most cheap headphones back in the days of Beatles.
I'm glad it helped. ... By: cortkatanakx1q. on 03 Mar 10, 16:01:22 I'm glad it helped. I'd had these headphones more than a year and I couldn't remove ear pads. I was affraid that? I am going to break it. But when you now how to do that, it's easy.
Thanks! I was ... By: oiko2k4. on 02 Mar 10, 17:14:32 Thanks! I was afraid to make the move you show. I thought that? i'll just break the earphones.. Helpfull video!!
![It\](http://i.ytimg.com/vi/V_X7Try0B2s/2.jpg "It\")
Latest comments made on this video:
By: cortkatanakx1q. on 12 Sep 11, 18:27:26
I don't want to invest in some special shoes right now. I have much better feel with socks and I really need to feel that pedal vibration. It's a good feature, but sometimes even with socks I barely feel? it. That's why I use socks. I feel very comfortable with this modification.
By: giupy86. on 12 Sep 11, 00:23:51
If you feel good with that solution is ok, but I recommend to use a pair of shoes instead of socks... With heavy pedals? like those the sock' s era is finished. You will not be sore with shoes and you' ll feel much much better... Ps: I was a socker player too, but with the CSP or modern load cell pedals you absolutely need shoes, with low profile possibly